Industrial Boiler Pressure Controller Pressure Controller Switch Steam Generator Type 120 20 Kg Pressure Switch

Product Description

Product Description

1. Pressure torque is used to protect refrigeration or air conditioning equipment from increased breathing pressure or reduced exhaust pressure in the refrigeration compressor system.
2. The pressure torque is also used to start and stop the refrigeration compressor and the air-cooled condenser fan;
3. With SPDT contact mechanism, allowed fluid temperature :-10°C~+110 °C;
4. Manual control, no need to use other instruments for functional testing.

Differential Pressure Control Switch

Differential pressure control is commonly used in gas or liquid systems to control the pressure difference between gas/liquid pipelines and circuits. A typical application is to install the controller in the bypass pipeline near the system pump. When the system pressure difference increases and exceeds the preset pressure, the control valve will open, allowing more liquid/gas to pass through the side valve, which will reduce the pressure difference between these two pipelines in the water system. On the contrary, the pressure difference between these two pipelines in the water supply system will increase.

 

performance
 

The set point can be quickly determined by reading the scale directly.
The differential pressure setting can be changed without moving the cover plate.

Electrical parameters

Switch connection ratings: 5amp 125/250VAC 1/4 H.P., 125VAC Fine Silver Contacts.

Product Parameters

Product parameters

model	Pressure (bar)		Pressure difference (bar)		Appearance setting (bar)		Upper limit of airtight test pressure (bar)
	Small	large	Small	large	OFF	ON
SPC-103	-0.5	3	0.35	1.5	1	2	16.5
SPC-106	-0.5	6	0.6	4	2	3	16.5
SPC-110	1	10	1	3	5	6	16.5
SPC-120	5	20	2	5	14	16	33
SPC-130	5	30	3	10	15	20	33

 

Product details

Product details

Wiring instructions

working principle

In mechanical systems, the airbag interface of the controller is connected to the pressure port. When the pressure in the mechanical system exceeds the pressure set point of the controller, the contacts of the micro switch of the controller are disconnected, cutting off or connecting the circuit, and the machine stops or starts operating. When the pressure in the mechanical system drops to the set pressure difference of the controller, the contacts of the micro switch of the controller automatically reset, the circuit is turned on or off, and the machine restarts or stops operating. Therefore, pressure controllers play a protective and starting role in machinery, and are of great significance for the reasonable operation of machinery.

 

 

Company Introduction

Company Introduction

Changsha Lingbo Environmental Protection Technology Co., Ltd. is a high-tech enterprise focusing on water treatment accessories. Its main products include RO membranes, ultrafiltration membranes, filter cloths, filter bags, filter elements, water tanks, dosing pumps, metering pumps, and pharmaceuticals, which are widely used in new energy, microelectronics, petrochemicals, medical, pharmaceutical, food and beverage, water treatment, and automobile manufacturing. We are able to provide RO systems and various water treatment products for residential, commercial, and industrial components. We not only focus on the quality and performance of our products, but we continue to research and innovate to provide more efficient, energy-saving, and environmentally friendly products and solutions for global customers.

System certification

 

System Certification Certificate

 

Application scope

Application scope

1. MGP series pressure controller is used in refrigeration and air condition system to regulate the high and low pressure limit control of equipment to      avoid too low suction pressure and too high exhaust pressure.
2. The MGP series pressure controller is also used to control the start and stop of compressors and condenser fans.
3. The MGP series pressure controller is also used in pneumatic, boiler, fire protection, ironing, hydraulic, water pump and other equipment.
4. The MGP series pressure controller is equipped with copper gas box joints, suitable for non corrosive media such as Freon, air, liquids, etc. It can      also be equipped with stainless steel gas box joints, used for corrosive gases such as ammonia or wave body systems.

Packaging & Shipping

 

FAQ

Q1. Is sample order acceptable?

A: Yes.It's ok.

Q2. How to place the order?

A: You can directly send us an email or inquire on Made-in-China.com.

Q3. How many days for delivery?

A: We have stock for standard products.

Q4. How to make the payment?

A: We accept BankT/T,Western Union,Paypal

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery