1812 Type 50gpd75gpd RO Membrane Anti Pollution Household Kitchen Water Purifier Direct Drinking Water Reverse Osmosis Filter Cartridge Accessories

Product Description

 

Product Description

Why use RO membrane

The pore size of the RO membrane is about 0.0001 micrometers, and under a certain pressure, water can pass through the RO membrane. Salt, heavy metals, bacteria, viruses, organic matter, colloids, etc. cannot pass through. Then separate pure water and concentrated water.

Product Structure Diagram
Product Description

 

High desalination LB-2012-150G membrane element
Can operate under extremely low pressure, suitable for household use
Water purifiers, hospitals, and laboratories are used for water purification
Handle municipal tap water, well water, and other water sources.

 

 

Our membrane elements use the world's advanced membrane technology
and fully automatic production equipment to ensure that the quality of each product is guaranteed.

 

Product characteristics

 

peculiarity

At high flow rate should have an efficient desalination rate, has a high mechanical strength and service life to play a function under low operating pressure, can withstand the influence of chemical or biochemical effects by PH value, temperature and other factors are less affected,RO membrane mainly for polymer filtration. The pore size is small to the nanometer level (1 nanometer =10*-9 meters), under a certain pressure, water molecules can pass through the RO membrane, and the inorganic salts, heavy metal ions, organic matter, colloids, bacteria, viruses and other impurities in the source water can not pass through the RO membrane, so that the pure water that can be passed and the concentrated water that can not be strictly distinguished.

Installation Instructions

1

Remove the pipe from the joint and use a wrench to unscrew the housing cover.

2
Pull out the old Ro film (use puer if necessary)

    3.4.Pull the new reverse osmosis membrane into the casing. Note that the water produced by the new reverse osmosis membrane in the first                    20 minutes needs to be filtered before drinking water.

Installation instructions

Unscrew the nut on the membrane housing cover at the inlet connection end, remove the inlet pipe, and then use a membrane housing wrench to loosen the membrane housing cover. Remove the RO membrane from the packaging, place the membrane end with 2 O-rings into the RO membrane housing (as shown in the figure below) and push it in. Finally, screw on the membrane housing cover and tighten it with a membrane housing wrench. Place the inlet pipe back into the inlet joint and tighten the nut, then push the membrane housing clamp into the large single clamp.

Usage direction                   

1. When installing RO membrane, attention should be paid to the direction of the membrane;
2. When installing a reverse osmosis membrane, first ensure that one end of the membrane has two O-rings;
3. When installing, be sure to place the end with O-ring into the end of the membrane housing with pure water connection. To install correctly, simply apply a gentle force to place the reverse osmosis membrane into the membrane housing. If there is too much resistance, do not forcefully place the membrane into the housing, otherwise it may cause permanent damage to the membrane housing or membrane components (the membrane manufacturer is not responsible for replacing components due to damage during installation);
4. Damage to the membrane shell and membrane element caused under above mentioned situation is not covered by the warranty.
 

Product Parameters

 

Product model	Purification flux	Average discharge	RO film specification	Matched membrane shell
LB-1812-50	50G	0.13L/min	46x298mm	1812 type membrane shell
LB-1812-75	75G	0.20L/min	46x298mm
LB-2012-100	100G	0.26L/min	48x298mm	2012 type membrane shell
LB-2012-125	125G	0.33L/min	48x298mm
LB-2012-150	150G	0.40L/min	48x298mm
LB-2812-200	200G	0.52L/min	68x298mm	2812 type membrane shell
LB-3012-300	300G	0.78L/min	73x298mm	3012 type membrane shell
LB-3012-400	400G	1.00L/min	71x298mm
LB-3013-400	400G	1.00L/min	68x333mm	3013 type membrane shell
LB-3013-600	600G	1.56L/min	68x333mm

 

Size MM, tolerance ±1MM
Model number	A	B	C	D
LB-1812-50	298	21	17	46
LB-1812-75	298	28	17	46
LB-2012-100	298	21	17	48
LB-2012-125	298	21	17	48
LB-2012-150	298	21	17	48
LB-2812-200	298	21	17	68
LB-3012-300	298	21	17	73
LB-3012-400	298	21	17	71
LB-3013-400	333	21	17	68
LB-3013-600	333	21	17	68

 

Application field

Application field

1. Used in scientific research industry.
2. Used in food and beverage, municipal and environmental protection fields.
3. It plays an important role in seawater and brackish water desalination, boiler feed water, industrial pure water and electronic grade ultra-pure water preparation, drinking pure water production, wastewater treatment and special separation process.
4. Chemical raw materials, organic solvents, etc.
5. Other filtration fields, etc.

 

Company Introduction

Company introduction
 

Changsha Lingbo Environmental Protection Technology Co., Ltd. is a high-tech enterprise focusing on water treatment accessories. Its main products include RO membranes, ultrafiltration membranes, filter cloths, filter bags, filter elements, water tanks, dosing pumps, metering pumps, and pharmaceuticals, which are widely used in new energy, microelectronics, petrochemicals, medical, pharmaceutical, food and beverage, water treatment, and automobile manufacturing. We are able to provide RO systems and various water treatment products for residential, commercial, and industrial components. We not only focus on the quality and performance of our products, but we continue to research and innovate to provide more efficient, energy-saving, and environmentally friendly products and solutions for global customers.
 

 

Packaging & Shipping

                             A box of 25 pieces

Warehouse

FAQ

1. What is reverse osmosis (RO)?
Reverse osmosis (RO) separates and purifies water through pressure driven separation. Reverse osmosis (RO) is a pressure driven separation process that utilizes the principles of semi permeable membranes and cross flow filtration. Reverse osmosis water treatment provides the best filtration effect.
RO membrane can serve as a barrier for all salt and inorganic molecules, as well as organic molecules with a molecular weight greater than about 100, making it an effective process for removing pollutants.
What is a 5-level RO water system?
First stage quartz sand (sand filter) pretreatment Second stage activated carbon (carbon filter) pretreatment Third stage resin (resin softener) pretreatment Fourth stage PP filter element and filter bag (micro filter) pretreatment Fifth stage reverse osmosis (RO system)
3. Water treatment application field:
1) Pure water, mineral water. (Bottled water, bottled water)
2) Water for food and beverage production. (Ice maker)
3). Water is used in the chemical and electronic industries, such as residential buildings, hotels, schools, hospitals, restaurants, boilers, and factories.
4) Household purified water Commercial purified water, medical water, and high-purity water for the electronics industry.
4. Our advantages:
1) The desalination rate of seawater is as high as 98% to 99%.
2) Pure water yield up to 75%
3) . Purified water for 24 consecutive hours
4) PLC controlled automatic flushing function.
5) . Optional UV sterilizer and ozone generator
6) . Low operating costs and long service life.
5: Easy machine installation
The machine installation is very convenient. The received machine has been fully assembled. Just follow the steps in our English manual.