Automatic Float Ball Valve, Full Water Automatic Stop Valve, Water Tower Stop Valve, Float Ball Switch, Water Level Controller

Product Description

Product Description

A liquid level valve is a device used to control the height and flow rate of a liquid. The following is a detailed description of the liquid level valve:

Definition
A liquid level valve, also known as a liquid level control valve or hydraulic control valve, is a valve that can automatically control the liquid level height of containers such as water tanks and towers. It detects the liquid level height through sensors and controls the opening and closing of valves through control devices, thereby achieving precise control of liquid flow and level.

Working principle
The working principle of the liquid level valve is mainly based on the following methods:

1. Float ball type: The valve is controlled by the up and down movement of the float ball. When the liquid level rises, the float rises and pushes the valve to close; When the liquid level drops, the float drops and the valve opens.
2. Electrode type: The liquid level height is detected by the change in capacitance between the electrode and the liquid level. When the liquid level changes, the capacitance between the electrodes will also change accordingly, triggering the action of the control device and controlling the opening and closing of the valve.
3. Ultrasonic type: uses the reflection principle of ultrasonic waves to detect liquid level height. The ultrasonic sensor emits ultrasonic waves, which reflect back upon encountering the liquid level. The liquid level height is determined by calculating the time difference between the emission and reception of ultrasonic waves, and the valve is controlled to open and close.
4. Differential pressure type: The opening and closing of the valve is controlled by the static pressure difference of the liquid. When the liquid level changes, the static pressure of the liquid will also change accordingly, triggering the action of the control device.

Automatically boil water when there is no water available

When the water level of the water tower drops, the float inside the valve sinks,
Drive the lever to open the pilot hole of the valve body,
Under the action of water pressure,
When the sealing surface of the control valve is opened, water flows out from the control valve

 

Selected PA66 nylon material

Environmentally friendly materials, products do not release harmful substances
Exquisite and smooth appearance
High temperature and high pressure resistance

 

304 stainless steel fastening screw

Stainless steel fastening screws do not rust,
Will not cause secondary damage to drinking water due to rusting

Automatically boil water when there is no water available

When the water level of the water tower drops, the float inside the valve sinks and drives the lever to open the pilot hole of the valve body. Under the action of water pressure, the sealing surface of the control valve opens, and water flows out from the control valve

Detailed Photos

 

Product Parameters

Internal installation - side inlet water

                       4 Responsibilities                                                      6 Responsibilities                                                           1-inch tube

Internal installation - upper water inlet

                        4 Responsibilities                                                       6 Responsibilities                                                          1-inch tube

External installation - side inlet water

                      4 Responsibilities                                                       6 Responsibilities                                                          1-inch tube

External installation - water inlet on top

                        4 Responsibilities                                                       6 Responsibilities                                                          1-inch tube

 

Installation Instructions

Installation steps for exterior design

               Align the water inlet with the                                    Align the hose with the water                                 Align the other side of the hose
                      joint and tighten it                                              tank connector and tighten it                                   Screw inlet under float valve
                                                           Aim the hose at the other side                     Check that all threaded ports are not aligned
                                                              Tighten the water inlet                                      Tighten, installation completed

 

Working principle of float valve

When the water level in the water tower drops, the floating ball falls and uses the pressure of the water in the pipe to open the sealing silicone surface plunger in the valve body, and the valve body opens for water supply; When the water level in the water tower rises, the float rises, the connecting rod drives the plunger, the silicone gel seals the inlet hole, and the valve body stops supplying water

precautions

precautions
1. Water pressure value: minimum water pressure of 0.2kg, maximum water pressure of 10kg.
2. This product should be installed vertically on a horizontal surface.
3. This product belongs to the liquid level control valve, and the float ball must be installed during installation
Must be vertically downward.
4. First, fix the inlet pipe on a horizontal surface, and then connect this valve to the inlet pipe according to its specifications. The main inlet pipe should be compatible with the nominal diameter of this valve.
5.When in use, all shut-off valves in front of this valve should be fully opened.
6.If two valves are installed in the same pool, they should be kept on the same horizontal plane.
7.Before installing this valve, be sure to flush out any impurities in the pipeline.
8.When using the interior product, there may be water droplets at the bottom, which is a normal phenomenon.

Maintenance and upkeep
When the water quality cleanliness is poor and there are many impurities in this valve, appropriate maintenance is required. When the user finds that the water addition time is prolonged, they can remove the control valve from the inlet pipe and clean the filter screen.

Packaging & Shipping

product name	float valve
specifications	6 points, 4 points, 1 inch
Single packaging box size	11*6*9
Carton size	100 pieces/  57 * 32 * 37.5

Company Profile

Company Introduction

Changsha Lingbo Environmental Protection Technology Co., Ltd. is a high-tech enterprise focusing on water treatment accessories. Its main products include RO membranes, ultrafiltration membranes, filter cloths, filter bags, filter elements, water tanks, dosing pumps, metering pumps, and pharmaceuticals, which are widely used in new energy, microelectronics, petrochemicals, medical, pharmaceutical, food and beverage, water treatment, and automobile manufacturing. We are able to provide RO systems and various water treatment products for residential, commercial, and industrial components. We not only focus on the quality and performance of our products, but we continue to research and innovate to provide more efficient, energy-saving, and environmentally friendly products and solutions for global customers.

 

 

FAQ

Q1:Are you a manufacturer?

A:we are both the factory and trade company.

Q2:What is the price of the product?
A: Our prices are based on the size and type of material, if you can give me the information, then we can give you an estimated price is for reference only. We can customize if need.

Q3:What about the warranty?
A: Normally it is guaranteed for 12 months since dispatching from factory.

Q4:What's your delivery date?
A: It depends on the quantity of orders. Delivery date is 7-30 days. If you need emergency products, we can speed up the production of the first arrangement.