Fully Automatic Liquid Level Control Switch Float Ball Valve M15-3 Liquid Level Controller Float Ball Switch

• Customization: Available
• Temperature: Ordinary Temperature
• Certification: ISO9001
• Model NO.: LB-Float level controller
• Media: Water
• Standard: Standard
• Connection Mode: Clamps
• Power: Manual
• Material: Plastic
• Type: Self-Operated
• Color: Blue
• Cable Length: 2-25 Meters
• Voltage: 125VAC, 250VAC
• Housing Material: PP
• Working Pressure: 0.5MPa
• Measurement Range: Generally 0~8000mm
• Accuracy: ± 10mm
• Contact Power: ≤ 70W
• Control Switch Voltage: DC/AC220V, DC24V, etc
• Control Contact Life: 1 × 10 ^ 7 Times
• Work Pressure: Generally 1.6MPa or 2.5MPa, etc
• Working Temperature: Standard Type Is -35~120 ºC
• Medium Density: 0.5~2.0g/Cm ³
• Transport Package: Carton
• Specification: 155*98mm
• Trademark: Lingbo
• Origin: China
• Production Capacity: 1000000 Per Year

Product Description

Product Description

liquid level switch is a mechanical switch placed inside a plastic casing, and the height controlled is adjusted by the length of its own cable.When the liquid level reaches the controller, the plastic shell tilts and the mechanical switch will close or cut off the circuit, thereby starting or stopping a pump or activating an alarm device, which can be used separately as a single point alarm (high level alarm or low level alarm)
It can also be used in combination with multiple points
Automatic drainage
Automatic hydration
Dual pump control with one in use and one backup

Liquid level regulator

Automatic drainage

Automatic water supply

High and low alarm

  

        Cable type float switch without counterweight suspension                  Submerged type without floating

Detailed Photos

 

Product Parameters

Specification parameters
Float Regulator	Liquid Controller /float switch
Rated voltage	250V(380V)/120V
Rated Frequency	50Hz/60Hz
Rated current	16A(8A)/10A(8A)/10A(4A)
Working temperature	0 degee to 80 degree
Mechanical endurance	≥100.000 times
Electric endurance	≥ 50.000 times
Protection grade	IP68CS
Standard cable length	5m 10m 20m as customs required
Switch currency	+++ ≥50 000switch workings tested by VDE specialisation
Protective connection	T 70U
Protection	Waterproof
Working pressure	Max.1bar
Circuit breaking capacity	Directly KW with 250V
Float	Polypropylene
Cable	Polypropylene Jacket
Counter Weight	Polypropylene Sealed Housing
Cable Material	HO7RN- F3x0.75mm2 , PVC (3x0. 5mm2,3x0.75mm2, 3x1.0mm2)

 

Widely used

Used for integrated pumping stations

              
Figure 1

The water level of the pump station is at a low level
Four liquid level sensors are perpendicular to the air
The pump is not starting at this time

Figure 2
The water level of the pump station gradually rises
The second liquid level sensor tilts in water
The pump is not starting at this time

Figure 3
The water level in the pump station continues to rise, and two liquid level sensors are poured into the water,
At this point, one of the pumps starts the next cycle, and the other pump is automatically rotated in this way
Keep both pumps in the same old and new condition

Figure 4The water level in the pump station continues to rise,
and three liquid level sensors are poured into the water. At this time,
two of the pumps are started

Figure 5
The water level of the pump station continues to rise,
Four liquid level sensors were poured into the water,
At this time, two pumps are starting simultaneously
Sending an alarm requires manual emergency handling

 

                                     

precautions

Installation precautions
1. Location selection:
The installation position should be far away from the water inlet, otherwise the fluctuation of the water inlet may cause the switch to malfunction.
If the switch device is located on the wall of the container pool, an L-shaped angle steel bracket can be installed.
If the switch device is located in the mixing area, anti wave tubes or anti wave baffles can be installed.
2. Pipe diameter selection: Choose a flange connection pipe with an inner diameter greater than the diameter of the floating ball.
3. Wiring requirements: It is recommended to use multi-core cables for wiring.
4. Load matching: The controlled circuit load must match the contact capacity of the float switch.
5. Liquid specific gravity: The specific gravity of the tested liquid must be greater than that of the float.
6. Float position: The action point of the float has been adjusted according to the customer's order requirements at the factory. Please do not adjust the float position arbitrarily.
7. Vertical installation: When installing the transmitter housing, a vertical suspension line should be installed without any tilt in any direction.

Wiring precautions
During the wiring process, ensure that the power cord is connected correctly to avoid short circuits or open circuits.
2. At the same time, ensure that the signal line is firmly connected to avoid poor contact or looseness.

Setting and Debugging
1. Sensitivity adjustment: According to the characteristics of the liquid and the requirements of liquid level changes, the sensitivity adjustment is completed through the adjustment button or electronic panel on the controller.
2. Upper and lower limit settings: Set appropriate upper and lower limits for the liquid level according to actual needs. When the liquid level reaches the upper limit, the controller will trigger an alarm or control signal; When the liquid level is below the lower limit, the controller will perform the corresponding operation.

Packaging & Shipping

 

Company Profile

Company Introduction

Changsha Lingbo Environmental Protection Technology Co., Ltd. is a high-tech enterprise focusing on water treatment accessories. Its main products include RO membranes, ultrafiltration membranes, filter cloths, filter bags, filter elements, water tanks, dosing pumps, metering pumps, and pharmaceuticals, which are widely used in new energy, microelectronics, petrochemicals, medical, pharmaceutical, food and beverage, water treatment, and automobile manufacturing. We are able to provide RO systems and various water treatment products for residential, commercial, and industrial components. We not only focus on the quality and performance of our products, but we continue to research and innovate to provide more efficient, energy-saving, and environmentally friendly products and solutions for global customers.

 

 

FAQ

Q1:Are you a manufacturer?
A:we are both the factory and trade company.

Q2:What is the price of the product?
A: Our prices are based on the size and type of material, if you can give me the information, then we can give you an estimated price is for reference only. We can customize if need.

Q3:What about the warranty?
A: Normally it is guaranteed for 12 months since dispatching from factory.

Q4:What's your delivery date?
A: It depends on the quantity of orders. Delivery date is 7-30 days. If you need emergency products, we can speed up the production of the first arrangement.